RMH TRIPLE 30-36 m3
NEW
- Manufacturer: RMH
- Model : TRIPLE 30-36
- Availability: When ordering
- Power source: Diesel
- Engine: Volvo Penta
- Specification 1
Küsi pakkumist
Rental/ trial option
ARK registration
Warranty 2 years
RMH Triple – high-capacity self-propelled feed mixer for large farms
The RMH Triple is a very high-performance self-propelled feed mixer designed for large dairy farms, feeding centres and multi-farm feeding service providers. The model range includes machines with 30 and 36 m³ mixing volumes, which allow the preparation of feed rations for approximately 230-275 animals in one working cycle.
The machine combines feed loading, cutting, weighing, mixing and dispensing into one complete process. This allows the entire feeding operation to be carried out by one machine and one operator, reducing the need for a separate loader, tractor and mixer trailer.
Triple is equipped with two vertical mixing augers, which ensure fast and uniform mixing of large quantities of feed. The overlapping mixing system helps to produce a homogeneous TMR ration, in which the feed ingredients are evenly distributed throughout the mixture.
The large machine is made easier to maneuver with three steered axles. The four-wheel drive provides traction on wet, muddy and uneven ground, and the three-axle chassis helps distribute the machine's load better. The maximum travel speed is up to 40 km/h, allowing you to quickly move between different farm buildings, silos and feeding areas.
The power source is a six-cylinder Volvo diesel engine. The published power variants of the model series are 286 and 340 hp, which provide sufficient power to load, mix and transport large amounts of feed even in difficult working conditions.
Using the RMH self-propelled feed mixer helps to consolidate several work steps into one machine, shorten feeding time and reduce the labor and fuel required to prepare one ton of feed. Triple is designed for users for whom high daily productivity, machine stability and high-quality feed rations are of primary importance.
Key benefits
Mixing volume 30 or 36 m³
Suitable for approximately 230-275 animals per cycle
Two vertical mixing augers
Three-axle chassis
Control of all three axes
Four wheel drive
Travel speed up to 40 km/h
Six-cylinder Volvo diesel engine
Engine power up to 340 hp
High loading and mixing capacity
Reduced need for a separate loader and tractor
Suitable for large farms, contractors and feeding centers
The RMH Triple is a suitable solution for a company that needs a self-propelled feed mixer with very high capacity, strong chassis and high daily output.
| Technical indicator | Triple 30 | Triple 36 |
|---|---|---|
| Mixing tank volume (m³) | 30 | 36 |
| Recommended herd size per cycle | Approximately 230–275 cows | |
| Number of vertical mixing augers | 2 | 2 |
| Number of axles | 3 | 3 |
| Number of steered axles | 3 | 3 |
| Four wheel drive | Yes | Yes |
| Maximum driving speed (km/h) | 40 | 40 |
| Engine manufacturer | Volvo | Volvo |
| Number of cylinders | 6 | 6 |
| Outboard | 286 or 340 hp, depending on model and configuration | |
Key features of RMH Triple
- 30 or 36 m³ mixing capacity
- Two high-performance vertical mixing augers
- Three-axle chassis
- Control of all three axes
- Four-wheel drive in difficult working conditions
- Travel speed up to 40 km/h
- Six-cylinder Volvo diesel engine
- Suitable for feeding up to approximately 275 animals in one cycle
- High-capacity self-loading system
- Designed for large farms and feeding centers
The published technical data concerns the Triple model series
in general. Engine power, dimensions, weight, delivery system and
Standard equipment depends on the model selected, the target market and
machine configuration. Specific machine specification
must be checked with the seller before ordering.
